Xenocron 4-port PWM Boost Control Solenoid
For use with:
Xenocron 4 port boost Solenoid utilizes the top and bottom of your waste-gate diaphragm. It allows you to use a much lower waste-gate spring pressure for better low gear boost control and better high gear, high boost settings.
5x the amount of boost when using a 10 lb waste-gate spring.
Better control which equals more power.
More accurate duty cycle control.
4 port boost control solenoids are designed for use in high boost applications, but will work just as great in low boost applications. It is normally closed so that on failure you will run off the waste-gate spring. It uses 1/8th NPT fittings.
If you are upgrading from a 3 port solenoid, the boost control tables will need re-tuning.