Barbed Fitting, 12mm Single Barb to -6 AN Female - subaru coolant size (larger than common)
ATP Turbo
Regular price $14.95
12mm (1.5 Pitch) to -4 AN Male Flare Fitting
Regular price $16.00
Fitting, Swivel, #6AN (-6 AN) Flare, Male to Female, 90 Degree
Regular price $9.95
O-RING GT28 T04B FRAME BACKPLATE TO COMPRESSOR HOUSING
Regular price $4.95
* Special Version - SMALL bolt holes version* Oil Drain ( Return ) Flange Gasket - GT GTX Series GT2
Regular price $3.00
O-Ring between GT42 Compressor Outlet V-Band Flanges
Regular price $11.00
ORING-T04E-BACKPLATE, Goes between Backplate and Comp Housing, T04E Frame GT/GTX
Regular price $5.00
Gasket, T4 ( T04 ) Turbine Outlet (4 Bolt round) - Common on "On Center" Housings
Regular price $15.45
Gasket, Downpipe (Turbine outlet) Gasket, "GT 4 Bolt 3" opening
Regular price $9.00
Gasket for T3 5 Bolt (Ford Style) Turbine Outlet Flange (Externally Gated)
Gasket, T4 (T04) Turbine Inlet - DIVIDED
Regular price $8.95
Flange, Oil Drain / Return, GT/GTX 40-45, T3/T4, Special Combo 45 degree tight turn elbow
Regular price $29.95
Oil Feed Line Set - VR6
Regular price $44.00
Special Bolt to Plug the Speed Sensor Port on the Garrett Compressor Housing GTX and Gen2
UNRESTRICTED Banjo style low profile -4 AN oil feed kit, incl. bolt, GT25 GT28 GTX28 GT30/35 GTX35
Regular price $24.95
Banjo Bolt, 14mm x 1.5 pitch w/ 2 crush washers
Washer - M8 (for 8mm bolt/stud or 5/16" size)
Regular price $0.95
3" V-band Flange/clamp SET Flat Machined MILD STEEL (3.75 OD Flanges / Grooved for 3" Tube)
Regular price $39.00
Tial Stainless V-band CLAMP, Turbine (DOWNPIPE SIDE) OUTLET for Tial V-Band Housing GT55 / GTX55
Regular price $59.54
CLAMP, V-Band DOWNPIPE SIDE 3" Garrett "GT V-Band" Turbine Housing w/ 90mm OD Flange GTX G25 G30 G35
Regular price $22.95
