Flange, Oil Drain / Return, GT/GTX 40-45, T3/T4, Special Combo 45 degree tight turn elbow
ATP Turbo
Regular price $34.95
Double Banjo Fitting, 12mm (m12) Banjo to dual 4AN
Regular price $14.95
Oil feed Line Kit for GT or GTX Turbo, 2013 Focus ST 2.0L Turbo
Regular price $75.00
Special Turbine Hardware (Housing Clamps and Bolts Kit) - For Tial SS GT28/GT30/GT35 GTX28 GTX30 GTX
Regular price $125.00
Special Bolt to Plug the Speed Sensor Port on the Garrett Compressor Housing GTX and Gen2
Set of replacement bolts, washers, gasket for ATP High Flow Manifold, 1.8T stock location
Regular price $41.00
Banjo Bolt M10, 10mm x 1.00 pitch w/ 2 crush washers
Banjo Bolt, 14mm x 1.5 pitch w/ 2 crush washers
Stud, stepdown type, 8mm to 6mm
Regular price $11.95
Washer - M10 (for 10mm bolt/stud or 3/8" size)
Regular price $6.55
Washer - M8 (for 8mm bolt/stud or 5/16" size)
Regular price $4.95
8mm (1.25pitch) Stud
V-band clamp GT47 GTX47 GTX50 (all versions) connect Turbine housing to CHRA
Regular price $29.95
3" V-band Flange/clamp SET Flat Machined MILD STEEL (3.75 OD Flanges / Grooved for 3" Tube)
Regular price $44.00
Tial Stainless V-band CLAMP, Turbine (DOWNPIPE SIDE) OUTLET for Tial V-Band Housing GT55 / GTX55
Regular price $64.95
3" Hose Clamp (Worm Gear - Screw Type) for 3" OD tube with a 3" ID hose
2.5" Hose Clamp (Worm Gear - Screw Type) for 2.5" OD tube with a 2.5" ID hose
T-Bolt Hose Clamp - 3.50" (Maximum Clamp Diameter)
Regular price $9.95
V-Band Clamp - 4" - For 4.75" OD Flanges
Regular price $24.95
Piping, Downpipe/Up-pipe, 5", V-band, GT/GTX55 TIAL FLANGE
Regular price $264.95
