BBS RE830 4x100 Drag Wheels
We are completely sold out of the 15x3.5" Skinnies and can no longer supply. They are completely out of production by BBS and will no longer be made.
We still have some centers available to build 13x8, 13x9 and 13x10 wheels.
With all of our test fitting we have only been able to verify that these will fit a civic spindle setup (small brake setup) with the use of a 10mm spacer for caliper clearance. We have been unable to fit them on an Integra Spindle car (but if you want to try and your own feel free). The issue isn’t the backspacing it is the way the back of the face of the 4×100 center is designed, it is very flat and it needs to be pushed off the caliper (with the use of a spacer) to get the caliper clearance required to work. You may be able to use them on an Integra Spindle with enough spacer size used but we have tested up to a 15mm size and have not successfully fitted them. Also will require the use of extended wheel studs.
All wheels are 4×100 lug pattern.
All 13″ wheels are priced and quoted with a 5″ backspacing
This is your shot. You will 100% see these selling for more than these prices listed once we sell out of all the wheels we have in stock. These will be a very hard to get and very desirable part of Honda/Acura Drag Racing.