BBS RE830 4x100 Drag Wheels

SOLD OUT and Discontinued

With all of our test fitting we have only been able to verify that these will fit a civic spindle setup (small brake setup) with the use of a 10mm spacer for caliper clearance. We have been unable to fit them on an Integra Spindle car (but if you want to try and your own feel free). The issue isn’t the backspacing it is the way the back of the face of the 4×100 center is designed, it is very flat and it needs to be pushed off the caliper (with the use of a spacer) to get the caliper clearance required to work. You may be able to use them on an Integra Spindle with enough spacer size used but we have tested up to a 15mm size and have not successfully fitted them. Also will require the use of extended wheel studs.

All wheels are 4×100 lug pattern.

All 13″ wheels are priced and quoted with a 5″ backspacing

This is your shot. You will 100% see these selling for more than these prices listed once we sell out of all the wheels we have in stock. These will be a very hard to get and very desirable part of Honda/Acura Drag Racing.