Blog

Here is an example of the high temperature coatings that we can offer. This Satin Black coating is rated at 1800 Degree's Heat Resistance and gives a great look to boot. As you can see in the photo time line we started with a slightly used Perrin Header for a WRX STi, then blasted it with 120 grit Aluminum Oxide to prepare for the coating, sprayed the coating in 2 light coats and finally cured it. Check out www.IPGCoating.com to see what else we can offer with our coating services !!! This particular header is actually scheduled to go on...

We are privileged to have a great network of customers around the world. Here is a video of one of them (Marco Grignon) Circuit Racing his Civic Type R EK9 in Guatemala

One of the things about our 2008 WRX STi that has irked us from the day we got the car was the clear tail lights. With the use of the Lamin-X Tail Light Overlays we have fixed the appearance and are happy with the outcome. The Lamin-X Overlays are an inexpensive film option that will still allow the correct amount of illumination from the Tail Light bulbs to shine through while completely changing the look of the rear of the car. We chose to cut out the reverse lamp and turn signal sections to give it a great look. Here...

After 6 months of ownership the first modifications have made their way onto our 2008 Subaru WRX STi. With just over 5k miles on the odometer we chose to go with the Cobb Catted Downpipe and a custom tune performed by Omar at Central Florida Turbo. These basic modifications are very easy to perform and provide a decent kick in the butt performance increase for the low cost invested. We chose the Catted Cobb Downpipe since it easily mates to the OEM Catback exhaust and offers only a slight increase in noise level from the OEM Downpipe. The dyno horsepower...

We have had this car for quite some time and we finally got around to doing some basic work to it. 1992 Integra GSR all original about 122,xxx miles This is how it sat when we first purchased it -- hard to find them this stock anymore.... This first round of modifications included Koni Yellow Sport Shocks, Ground Control Coilovers, Skunk2 Shock Hats, Blox Rear Lower Control Arms, JDM One Piece Headlights, Black Civic HX Wheels with Azenis and a Thule Roof Rack. We will soon update the Project Car Section with more information on this vehicle as well as...