Email: Sales@IPGparts.com | Phone: 407-324-4684
Email: Sales@IPGparts.com | Phone: 407-324-4684
Cart 0

Blog — bbs

9.75 @ 142mph All Motor CRX

all motor bbs Civic CRX drag cartel General Hayward hayward performance IPG IPG Parts IPGParts.com K20 Honda CRX Lenso M&H Race Tires PPG

9.75 @ 142mph All Motor CRX

The IPGparts.com Race Team traveled to Englishtown, NJ on Sept 30th - Oct 1st, 2017 to compete in the All Motor $10k shootout at Fast Fest Live. The annual event held the first week of October is one of the best around as racers from all over the country travel to Englishtown Raceway Park knowing the weather will be great and the track will be hooking. A personal best time was run during the 3rd qualifying session Saturday evening as Tom Creen blasted a 9.75 @ 142mph pass to qualify the team in the 5th spot for Sunday's eliminations. Creen...

Read more →


K20a2 CRX - 11.30 @ 119mph

11 second all motor 11 second crx bbs crx drag car dc5r ftw ftw red IPG ipg crx ipg k20 IPG Racing IPGParts.com k20 crx K20 Honda CRX k20a k20a2 Uncategorized

K20a2 CRX - 11.30 @ 119mph

We recently took the K20a2 CRX out to Orlando Speedworld for some more testing which resulted in even quicker ETs and higher MPHs. Fuel testing allowed the team to pick up 10-12 horsepower by using FTW Red and that showed on track running the quickest ET and fastest MPH to date of 11.30 @ 119mph. Bone Stock K20A2 Engine (Stock Pistons, Stock Rods, Stock Valvetrain, Stock Camshafts, Stock Ports, etc) RRC Intake Manifold with 68mm Skunk2 B Series Throttle Body DTR K20 4-1 Header with Megaphone Custom 3″ Intake Hondata KPro Fuel Injector Clinic 900cc Injectors FTW Red Race Gasoline...

Read more →


BBS Drag Wheels to go on Sale on April 18th, 2013

acura drag wheels bbs bbs drag wheels drag General honda drag wheels lightweight rare drag wheels wheels

BBS Drag Wheels to go on Sale on April 18th, 2013

Here it is, the official release and pricing. We have a very limited # of these available. With all of our test fitting we have only been able to verify that these will fit a Civic Spindle setup (small brake setup) with the use of a 10mm spacer for caliper clearance. We have been unable to fit them on an Integra Spindle car (but if you want to try and your own feel free). The issue isn't the backspacing it is the way the back of the face of the 4x100 center is designed, it is very flat and it...

Read more →