Email: Sales@IPGparts.com | Phone: 407-324-4684
Email: Sales@IPGparts.com | Phone: 407-324-4684
Cart 0

Blog — bbs drag wheels

All Motor CRX Gets Quicker - 9.84 @ 140mph

9 second all motor 9 second crx all motor crx bbs drag wheels CRX drag cartel General hayward performance IPG ipg crx IPG Parts IPGParts.com jbre k20 crx K20 Honda CRX mazworx psi valve springs supertech titanium valves

All Motor CRX Gets Quicker - 9.84 @ 140mph

The off season has been a busy time for the IPG crew as the All Motor CRX received a completely new engine. Ending last year with a stellar 9.92 @ 138mph time slip the drive to go quicker and faster took over and a bigger, badder engine was planned out for the start of the 2015 race season. Working with JBR Engines and Drag Cartel a 99mm stroke x 89mm bore engine was created using the best of the best parts. Jeremy Lookofsky of Drag Cartel performed his newest and most efficient cylinder head program and finished it up with...

Read more →


Stock Block K20 CRX - 11.24 @ 120mph

4Piston bbs drag wheels CRX General IPG ipg crx IPG Parts IPG Racing IPGParts.com k20 crx K20 Honda CRX k20a k20a2 stock block k20

Stock Block K20 CRX - 11.24 @ 120mph

Knocking that number down little by little. Went back out to the track this past Friday night and managed a new personal best. 11.24 @ 120mph. Getting quicker even in the heat of the Central Florida spring time weather is very promising for how the engine is working currently. If we can continue to make incremental improvements in the heat when the weather cools off we will have something great to work with.

Read more →


BBS Drag Wheels to go on Sale on April 18th, 2013

acura drag wheels bbs bbs drag wheels drag General honda drag wheels lightweight rare drag wheels wheels

BBS Drag Wheels to go on Sale on April 18th, 2013

Here it is, the official release and pricing. We have a very limited # of these available. With all of our test fitting we have only been able to verify that these will fit a Civic Spindle setup (small brake setup) with the use of a 10mm spacer for caliper clearance. We have been unable to fit them on an Integra Spindle car (but if you want to try and your own feel free). The issue isn't the backspacing it is the way the back of the face of the 4x100 center is designed, it is very flat and it...

Read more →


Modern Day Barn Find -- BBS 4x100 Drag Wheels

acura drag wheels bbs 4x100 bbs drag wheels bbs wheels belak belak industries General honda drag wheels rare bbs wheels Rare Parts v2 racing wheels v2 wheels weld racing

Modern Day Barn Find -- BBS 4x100 Drag Wheels

This story is still amazing to me. The wheels are finally here and I still don't really believe it. Anyone that may of been associated with FWD Drag Racing for a while might remember a very rare, not very used drag wheel built by BBS back in the late '90s, early 2000's. I have known about these 4x100 BBS Drag Wheels since approximately 2004 when the only 2 sets that I knew of in existence belonged to Stacey Hyche and Tracey Hyche who ran a NDRA Turbo 4 Integra and a NDRA Comp 4 Civic. They were also offered in...

Read more →